Cables

From ICE Enterprises
(Redirected from ICE-CAB-SB5)
Jump to navigation Jump to search

Digital I/O modules present a 40-pin male 0.1in (series 2) or 0.05in (series 3) dual-row header to the external world. All analog signals present a male SMB connector, including the external sync signal, A2D clock/data, D2A clock/data, and the CXD modules' 75ohm SMB connectors.

Cables for ICE Products

The following cables used to interface with ICE products are available for purchase (see the Pricing page):

Part No. Description Available for Purchase
ICE-CAB-SB5 Coaxial 5-foot female SMB to male BNC for A2D, D2A, and CXD modules Yes
ICE-CAB-MM5 Coaxial 5-foot male MMCX to male BNC for our Slim-PIC cards No
ICE-CAB-SMA5 Coaxial 5-foot male SMA to male BNC for our LB2D and D2AWG modules Yes
ICE-CAB-HD5 40-pin high-density ribbon cable for E2D, D2E, T2D, and D2T modules (pinout information below) No
ICE-CAB-STST6 Fiber ST 6" jumper cable Yes

Pinout Diagrams and Information

ICE-CAB-HD5

Ribbon-cable-pinout-crop.jpg

P/N0 -15 are positive/negative data bits, and P/NCLK are the clock.

The first two pairs of NCs may be used for parity. The last NC pair is necessary for clock integrity.

Please note: The standard setup is LSB=0, MSB=15.

16-bit Differential I/O Ribbon Cable

N0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 NC NCLK
P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 NC PCLK

where P/N0-15 are positive/negative data bits, P/N16-17 are parity on some modules, and P/NCLK are the clock.

A 40-pin ribbon to ELCO transition panel for a MIDAS DSM is available through STL at 937-429-7470.

  • The 6-position panel with Low-Density Connectors for series 2 cards is part 1013-0118-06.
  • The 6-position panel with High-Density Connectors for series 3 cards is part 1013-0130-06.
  • The 8-position panel with High-Density Connectors for series 3 cards is part 1013-0131-06.

The connector on the standard 36-pin ribbon to ELCO MIDAS DSM transition panel is shown below.
These connectors are available through Newark at 1-800-463-9275, part # 93F8099.
See HELP CARDS MIDASDSM for more information.

MIDAS Digital Switch Matrix Panel Connector (36-pin)

N0 N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 NCLK NC
P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 PCLK NC

where P/N0-15 are positive/negative data bits, and P/NCLK are the clock.

Status

These cables are available for purchase. For pricing, please see the Pricing page.