Effective January 1st 2022, ICE Enterprises will increase all product prices by 20%. Market forces, both rising component cost and increasing material lead time, are requiring the first price adjustment in company history. This price increase will allow ICE Enterprises to continue to design and manufacture quality electronic hardware as has been the case for over two decades. ICE Enterprises will honor all current price quotes and accept orders at existing pricing through the end of December 2021.
Digital I/O modules present a 40-pin male 0.1in (series 2) or 0.05in (series 3) dual-row header to the external world. All analog signals present a male SMB connector, including the external sync signal, A2D clock/data, D2A clock/data, and the CXD modules' 75ohm SMB connectors.
Cables for ICE Products
The following cables used to interface with ICE products are available for purchase (see the Pricing page):
|Part No.||Description||Available for Purchase|
|ICE-CAB-SB5||Coaxial 5-foot female SMB to male BNC for A2D, D2A, and CXD modules||Yes|
|ICE-CAB-MM5||Coaxial 5-foot male MMCX to male BNC for our Slim-PIC cards||No|
|ICE-CAB-SMA5||Coaxial 5-foot male SMA to male BNC for our LB2D and D2AWG modules||Yes|
|ICE-CAB-HD5||40-pin high-density ribbon cable for E2D, D2E, T2D, and D2T modules (pinout information below)||No|
|ICE-CAB-STST6||Fiber ST 6" jumper cable||Yes|
Pinout Diagrams and Information
P/N0 -15 are positive/negative data bits, and P/NCLK are the clock.
The first two pairs of NCs may be used for parity. The last NC pair is necessary for clock integrity.
Please note: The standard setup is LSB=0, MSB=15.
16-bit Differential I/O Ribbon Cable
where P/N0-15 are positive/negative data bits, P/N16-17 are parity on some modules, and P/NCLK are the clock.
A 40-pin ribbon to ELCO transition panel for a MIDAS DSM is available through STL at 937-429-7470.
- The 6-position panel with Low-Density Connectors for series 2 cards is part 1013-0118-06.
- The 6-position panel with High-Density Connectors for series 3 cards is part 1013-0130-06.
- The 8-position panel with High-Density Connectors for series 3 cards is part 1013-0131-06.
The connector on the standard 36-pin ribbon to ELCO MIDAS DSM transition panel is shown below.
These connectors are available through Newark at 1-800-463-9275, part # 93F8099.
See HELP CARDS MIDASDSM for more information.
MIDAS Digital Switch Matrix Panel Connector (36-pin)
where P/N0-15 are positive/negative data bits, and P/NCLK are the clock.
These cables are available for purchase. For pricing, please see the Pricing page.