Writing Tables Files
A table file contains all information necessary to run complex ICE signal process applications of many varieties and can be custom tailored for all of the ICE hardware platforms and modules.
Structure
SNAPSET
SNAPSET={ ! Contains defaults
...
}
CASE
CASE_XXX={ ! Particular cases
...
}
CASE_YYY={
SWITCHES=$CASE/SOME_SWITCH ! Inheritance from case above
}
- Left hand side switches override right ones
- Good practice to use PIC<N>AUTO alias (obtained from ICE AUTO)
- The PIC card is divided between A and B sides, where the A side has
odd numbers and the B even. - A side: Module 1, odd numbered tuners on processor modules - B side: Module 2, even numbered tuners on processor modules
- Auto-start with ACTION=X, where X is the name or unique abbreviation
of the snapper button corresponding to the desired action, e.g., ACTION=mon to bring up snapper and start monitoring
- V6Ms have Tuner Banks using onboard memory
- Switches with SnapApp
- nM> snapapp/use={CARD=PIC1AUTO,PORT=MODULE1}
^^^Table file syntax^^^
(Flags is a Switch)
Streaming:
nM> res hwalias -> show PIC cards and NIC ports
ATL=8M
Global (pulling out controls/widgets): CONTROLS={
ADDR={} AFNAME={}
}
Network/Streaming Interface
Multicaster:
APPLIST
APPLIST={
APP_NAME="A,B,C" (common-separated list of cases)
}
SERVER_DEFAULTS
SERVER_DEFAULTS={
SCENE=<SCENE> MODE=OPEN
}
Examples
SERVER_DEFAULTS={
SCENE=<SCENE> MODE=OPEN
}
AFNAME="udp:^{hwalias.nic1port}/224.1.10.1:7777" AFQUAL="FUNC=ICEMULTI,PKTLEN=8K" WAVE=NONE FLAGS=BLOCK=1M SWITCHES=RF/ADLM/GC={APKT=OFF,RFFREQ=900,RFBW=80,RFGAIN=10,RFOPTS=ENABLE|LNA|DCS|AIS}
CASE_CH1={
CARD=PIC1AUTO PORT=MODULE1 AFNAME="udp:^{hwalias.nic1port}/224.1.10.1:7777"
}
Catcher:
SERVER_DEFAULTS={
SCENE=MONALL MODE=OPEN
}
PORT=STREAM1 SWITCHES=NIC/GC={ADDR=224.10.0.1,SOCK=7777}/PKTLEN=8K
AFNAME=archive AFQUAL="RG=IFS" WAVE=none FLAGS=NONE SWITCHES=ACQ CONTROLS={ ADDR={} AFNAME={} }
CASE_MCH1={
CARD=NIC1AUTO PORT=STREAM1 SWITCHES=NIC/GC={ADDR=224.1.10.1,SOCK=7777}/PKTLEN=8K/ATL=8M/AAUX=11 AFNAME=mon1arch
}
CASE_MCH2={
CARD=NIC2AUTO PORT=STREAM2 SWITCHES=NIC/GC={ADDR=224.1.10.2,SOCK=7777}/PKTLEN=8K/ATL=8M/AAUX=12 AFNAME=mon2arch
}
See Also