Difference between revisions of "Removing an I/O Module"
Jump to navigation
Jump to search
(Created page with "<div> When removing an I/O module from an ICE-PIC card, please take special care to remove the screws on the bottom of the card, which are identified below: there are four scr...") |
(No difference)
|
Latest revision as of 11:53, 22 May 2018
When removing an I/O module from an ICE-PIC card, please take special care to remove the screws on the bottom of the card, which are identified below: there are four screws (two per module) on the bottom of the card holding the modules in place. You do not want to remove the screws on the top of the modules, because this will release the spacers/washers for the modules.
