ICEBOT
Jump to navigation
Jump to search
file to file Bank Of Tuners application
<in> Input file (complex) <out> Output file (complex) <nchn> Number of channels <freq> Tuner frequency (channel 0) <dfreq> Tuner channel spacing <orate> Output Rate (complex) <gain> Tuner gain This command uses an ICE-CORE library to channelize a Midas file on disk. The output is a single type 2000 file with blocks of data frames. Each block contains one frame for each channel in succession from channel 1 to <nchn>. The CHANNELS keyword indicates the number of frames/channels in each block. Individual channels can be extracted using the thin command followed by HEADERMOD nM> thin in=blockdatafile out=channeldata start=<channel> end=-1 inc=<nchn> nM> headermod channeldata type=1000 Switches: /AFLAGS=s Special flags to apply to ICE card /OFORM=n Output format (SI,CI)