Difference between revisions of "ICE-E2D-r5"
(Created page with "<div class="description">Differential ECL to Digital Converter Module</div> <div id="eol-notice" style="padding: 7px; margin-bottom: 10px; border:solid 1px #c00; clear: both;"...") |
(No difference)
|
Latest revision as of 11:36, 22 May 2018
The ICE-E2D module is a differential ECL-to-LVTTL converter for use on an ICE-PIC card with a 16-bit digital I/O site. It converts F100K differential ECL logical levels (compatible with standard Midas switch connections) into LVTTL levels.
The module supports a number of termination options. The center of the differential input resistor pair may be:
- Left open
- Connected directly to Gnd
- Connected to Gnd through a capacitor
The default configuration for SDN connections is option 3, with 50 ohm resistors and 0.1uF capacitors. For direct ribbon cable connections, option 1, with a pair of 50 ohm resistors, is typically used. Options 1 and 2 must be special ordered.
The input/output connector is a 40-pin ribbon cable with data bit 0 on pins 1 and 40, bit 1 on pins 2 and 39, etc., bit 15 on pins 16 and 25, and clock on pins 20 and 21.
Status
EOL has been declared for this model: see End-of-Life for details. Please call for pricing and availability.