Effective January 1st 2022, ICE Enterprises will increase all product prices by 20%. Market forces, both rising component cost and increasing material lead time, are requiring the first price adjustment in company history. This price increase will allow ICE Enterprises to continue to design and manufacture quality electronic hardware as has been the case for over two decades. ICE Enterprises will honor all current price quotes and accept orders at existing pricing through the end of December 2021.

ICE-E2D-r5

From ICE Enterprises
Jump to navigation Jump to search
Differential ECL to Digital Converter Module
Notice: End-of-Life has been announced for this product. Please see End-of-Life for details.
E2D-r5 Top
E2D-r5 Bottom
E2D-r5 Diagram

The ICE-E2D module is a differential ECL-to-LVTTL converter for use on an ICE-PIC card with a 16-bit digital I/O site. It converts F100K differential ECL logical levels (compatible with standard Midas switch connections) into LVTTL levels.

The module supports a number of termination options. The center of the differential input resistor pair may be:

  1. Left open
  2. Connected directly to Gnd
  3. Connected to Gnd through a capacitor

The default configuration for SDN connections is option 3, with 50 ohm resistors and 0.1uF capacitors. For direct ribbon cable connections, option 1, with a pair of 50 ohm resistors, is typically used. Options 1 and 2 must be special ordered.

The input/output connector is a 40-pin ribbon cable with data bit 0 on pins 1 and 40, bit 1 on pins 2 and 39, etc., bit 15 on pins 16 and 25, and clock on pins 20 and 21.

Status

EOL has been declared for this model: see End-of-Life for details. Please call for pricing and availability.