View source for Cables

[[Digital_modules|Digital I/O modules]] present a 40-pin male 0.1in (series 2) or 0.05in (series 3) dual-row header to the external world.  All [[Analog_modules|analog signals]] present a male SMB connector, including the external sync signal, A2D clock/data, D2A clock/data, and the CXD modules' 75ohm SMB connectors.

== Cables for ICE Products ==

The following cables used to interface with ICE products are available for purchase (see the [[Pricing|Pricing page]]):

{| class="wikitable" width="100%"
! Part No.
! Description
! Available for Purchase
|-
| ICE-CAB-SB5
| Coaxial 5-foot female SMB to male BNC for A2D, D2A, and CXD modules
| Yes
|-
| Cables|ICE-CAB-MM5
| Coaxial 5-foot male MMCX to male BNC for our Slim-PIC cards
| No
|-
| Cables|ICE-CAB-SMA5
| Coaxial 5-foot male SMA to male BNC for our LB2D and D2AWG modules
| Yes
|-
| Cables|ICE-CAB-HD5
| 40-pin high-density ribbon cable for E2D, D2E, T2D, and D2T modules (pinout information below)
| No
|-
| Cables|ICE-CAB-STST6
| Fiber ST 6" jumper cable
| Yes
|}

{{pagebreak}}

== Pinout Diagrams and Information ==

=== ICE-CAB-HD5 ===
[[File:Ribbon-cable-pinout-crop.jpg|frame|center]]

P/N0 -15 are positive/negative data bits, and P/NCLK are the clock.

The first two pairs of NCs may be used for parity.  The last NC pair is necessary for clock integrity.

'''Please note:''' The standard setup is LSB=0, MSB=15.

=== 16-bit Differential I/O Ribbon Cable ===

{| class="wikitable" width="100%"
| N0
| N1
| N2
| N3
| N4
| N5
| N6
| N7
| N8
| N9
| N10
| N11
| N12
| N13
| N14
| N15
| N16
| N17
| NC
| NCLK
|-
| P0
| P1
| P2
| P3
| P4
| P5
| P6
| P7
| P8
| P9
| P10
| P11
| P12
| P13
| P14
| P15
| P16
| P17
| NC
| PCLK
|}

where P/N0-15 are positive/negative data bits, P/N16-17 are parity on some modules, and P/NCLK are the clock. 

A 40-pin ribbon to ELCO transition panel for a MIDAS DSM is available through STL at 937-429-7470. 
* The 6-position panel with Low-Density Connectors for series 2 cards is part 1013-0118-06. 
* The 6-position panel with High-Density Connectors for series 3 cards is part 1013-0130-06. 
* The 8-position panel with High-Density Connectors for series 3 cards is part 1013-0131-06.
{{pagebreak}}
The connector on the standard 36-pin ribbon to ELCO MIDAS DSM transition panel is shown below.<br />
These connectors are available through Newark at 1-800-463-9275, part # 93F8099.<br />
See [[ICE_Help_CARDS#MIDASDSM|HELP CARDS MIDASDSM]] for more information.

=== MIDAS Digital Switch Matrix Panel Connector (36-pin) ===

{| class="wikitable"  width="100%"
| N0
| N1
| N2
| N3
| N4
| N5
| N6
| N7
| N8
| N9
| N10
| N11
| N12
| N13
| N14
| N15
| NCLK
| NC
|-
| P0
| P1
| P2
| P3
| P4
| P5
| P6
| P7
| P8
| P9
| P10
| P11
| P12
| P13
| P14
| P15
| PCLK
| NC
|}

where P/N0-15 are positive/negative data bits, and P/NCLK are the clock.

== Status ==

These cables are available for purchase.  For pricing, please see the [[Pricing|Pricing page]].

[[Category:Accessories]]
[[Category:I/O_modules]]