ICESERVER
Jump to navigation
Jump to search
launch an HTTP Service for an ICE Appliance
<port> Port for the HTTP Server [8080] <cfg> Snapapp config table name [ICEBOX] <scene> Scene in config table [] <mode> Action to perform on startup [NONE] This macro is used to control an ICE Appliance via an HTTP Service. The <mode> can be used to automatically OPEN a snapapp instance. Use the /ACTION= switch in the config table to initiate the desired SNAPAPP startup action. The ICE AUTO function must be run on the appliance after installing ICE cards and/or reassigning network port addresses of any NIC ports. This generates an iceauto.tbl file in the startup directory that is used from then on by the system. The supported MODE actions are: OPEN - start snapapp instance and connect to it CLOSE - stop snapapp instance POWEROFF - power off the appliance REBOOT - reboot the appliance EXIT - stop the service Switches: /NOINIT - Do not initialize and autoconfig hardware /NOEXIT - Remove EXIT from the mode menu /NOREBOOT - Remove REBOOT from the mode menu /NOPOWEROFF - Remove POWEROFF from the mode menu /PAC - Special placements for PAC applications