WAVEFORM
Revision as of 15:19, 27 April 2020 by ConvertBot (talk | contribs) (creates signal waveforms of various shapes)
creates signal waveforms of various shapes
<out> Name of output file <shape> Shape of waveform [DEF=SIN] <form> Format of output file (SF, CF, SB, etc.) <elem> Number of elements in output file <rate> Sample rate in Hz <gain> Waveform amplitude (0=nominal for given data type) <freq> Waveform (IF) frequency (Hz) <baud> Waveform BaudRate frequency (Hz) This primitive generates the following shaped waveforms: Sine - Sinusoid CoSine - CoSinusoid Square - Square waveform Triangle - Triangle waveform SawTooth - Sawtooth or RIGHT triangle waveform Pulse - Single sample pulse Constant - Constant values given by nominal value adjusted by gain Zero - Same as CONSTANT with all zeros LRS - Efficient noise generator using a linear recursive sequence White - White noise algorithm with standard deviation of <sdev>. See note below. Ramp - Ramp that increments by one with MAX <amp>-1 and MIN of -<amp>. TRamp - Test Ramp that increments by 3 in the upper byte Notch - LRS with a notch at <freq>. Use /DFREQ=df to adust width MixLS - Mix of LRS and SIN MuxLS - Mux of LRS and SIN MixNS - Mix of Notch and SIN BPSK - 2 Phase Shift Keyed QPSK - 4 Phase Shift Keyed 8PSK - 8 Phase Shift Keyed 16APSK - 16 Amplitude+Phase Shift Keyed 16QAM - 16 Quadrature Amplitude Modulation 64QAM - 64 Quadrature Amplitude Modulation 128QAM - 128 Quadrature Amplitude Modulation 256QAM - 256 Quadrature Amplitude Modulation The most current list of waveforms may be listed as follows: nM> invoke list=nxm.ice.prim.icewave.shapeList nM> results list The /RT or /THROTTLE= switch can be applied to simulate a throttled data source. In FULL mode, the primitive runs as fast as it can. In REALTIME mode the data is throttled to be produced at a rate of 1 element per <delta> second(s). In the BLOCK mode, no data is produced. Examples: Switches: /RT - RealTime mode /SEED=<num> - Set seed number [DEF=-1] /THROTTLE=<mode> - Data Throttle Mode (RealTime,Full,Block). Overrides /RT. /TL=n - Transfer Length elements [DEF=4096] /FB - Use page aligned fast buffer /FB=2 - Repeat first buffer of TL elements for speed tests /STATS - Show transfer statistics /NTAP=n - Number of taps in filter (notch or mod resampler)