ICE-E2D-r5
The ICE-E2D Module is a differential ECL to TTL converter for use on an ICE card with a 16-bit digital I/O site. It converts F100K differential ECL logical levels (compatible with standard Midas switch connections) into TTL levels.
The module supports a number of termination options. The center of the differential input resistor pair may be:
- Left open
- Connected directly to Gnd
- Connected to Gnd through a capacitor
The default configuration for SDN connections is option 3 with 50 ohm resistors and 0.1uF capacitors. For direct ribbon cable connections, option 1 with a pair of 50 ohm resistors is typically used. Options 1 and 2 must be special ordered.
The input/output connector is a 40-pin ribbon cable with data bit 0 on pins 1 and 40, bit 1 on pins 2 and 39, etc., bit 15 on pins 16 and 25, and clock on pins 20 and 21.
Pricing and Status
This model is in production and may be purchased for the price of $250.00 per unit.
